Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Thermostat

Hi I am having problems with my Honey well PRO Non-Programmable Digital Thermostat (1 Heat don't know when I will need to get new. Bat tiers I think it's hard wire can any one help me

Comments

  • Jamie Hall
    Jamie Hall Member Posts: 23,159
    Kinda tough to do

    when you give no indication at all as to what your problem is.
    Br. Jamie, osb
    Building superintendent/caretaker, 7200 sq. ft. historic house museum with dependencies in New England
  • SWEI
    SWEI Member Posts: 7,356
    This is the 12th thread you've started in one week

    about your thermostat.  ****?
  • BobC
    BobC Member Posts: 5,476
    Complicated

    Two wires AND a knob, no end of mischief can come from something like that.



    Bob
    Smith G8-3 with EZ Gas @ 90,000 BTU, Single pipe steam
    Vaporstat with a 12oz cut-out and 4oz cut-in
    3PSI gauge
  • Zman
    Zman Member Posts: 7,561
    Buck up

    I think you either need to give a complete description of the components and the issue you are having or buck up and do some reading.

    No one can help you if you are not specific.

    A drawing would help.

    Carl
    "If you can't explain it simply, you don't understand it well enough"
    Albert Einstein
  • Andrew boiler
    Andrew boiler Member Posts: 44
    Update

    I posted having problems with my PRO Non-Programmable Digital Thermostat (1 Heat



    I have my own zone in my master bed room and it's saying it's 71 in my room it's set at 68.



    Is there anything I can do to save service man to come on a Sunday?
  • Zman
    Zman Member Posts: 7,561
    Wire

    What is the other end of the wire attached too?

    Do you have and know how to use a multimeter?

    Carl
    "If you can't explain it simply, you don't understand it well enough"
    Albert Einstein
  • Andrew boiler
    Andrew boiler Member Posts: 44
    Wire

    No I don't know how to use a multimeter
  • Zman
    Zman Member Posts: 7,561
    What happened

    When did it stop working?

    Is this a new t-stat?

    The wire goes to your mechanical room. Can you post a picture?

    Carl
    "If you can't explain it simply, you don't understand it well enough"
    Albert Einstein
  • Weezbo
    Weezbo Member Posts: 6,232
    over shoot...

    it may just be that the boiller fired off and it ran the heat into the room and it is now there trying to get out the emitter as quick as it can , if you are in an apartment buildingg most likely you are thinking to open a window ...dont. it is probably not your thermostat per se.
This discussion has been closed.