Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Wanted - Gas burner gun for 125k input

Looking to switch to gas from oil, boiler is a Trianco, 125k range will work plus or minus 20k. What do you have?

<a href="mailto:Matt.connolly3@gmail.com">Matt.connolly3@gmail.com</a>

610-392-7020

Thanks!



Also - I'm a full time auto mechanic, so if your work truck needs brakes or other repair I'll gladly trade.



Matt

Comments

  • JStar
    JStar Member Posts: 2,752
    Gas

    Are you planning to install this yourself? Do you have a combustion analyzer? How do you plan to alter to the venting?
  • Steamhead
    Steamhead Member Posts: 16,796
    I wasn't aware

    Trianco marketed oil boilers in this country. What model is yours?
    All Steamed Up, Inc.
    Towson, MD, USA
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting
  • Matt_Connolly
    Matt_Connolly Member Posts: 14
    Yes, I am, and Yes, they do.

    I have access to an analyzer and I have seen other boilers identical to mine on other jobs. But really all I want is a gas fired burner gun! I'll buy a new one if needed, but I'd rather buy one from a guy who pulled one from a job or has an extra one.
  • JStar
    JStar Member Posts: 2,752
    Gas

    Where are you located? We often have spare burners around the shop.
  • Matt_Connolly
    Matt_Connolly Member Posts: 14
    Near Allentown, PA

    Bethlehem, in fact. An hour north of Philly, a bit more than that west of NYC. Let me know what you have.

    Matt
  • Matt_Connolly
    Matt_Connolly Member Posts: 14
    Model is a HC 145

    And the flange is the standard 3" size. Looking for a gun to fit in there for the conversion. It's getting cold and I can't go back to oil - the tank is too old and can't be changed since the house has been modified since the installation and there's no way to get the old tank out or get a new one in.
This discussion has been closed.