Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Wall of Shame. B-Vent Sealer

I didn't know that Tyvek tape was approved for sealing B-Vent. Actually, "sealing" is being generous; the tape was holding the pipe together with a 1/2" gap in between. Scary.



We changed out the furnace, and the venting.

Comments

  • Bob Harper
    Bob Harper Member Posts: 1,034
    hack-itis

    Joe, it looks like they taped 5" upper section into a 6" lower section, right?



    Good catch. If you show this to the ones who did it they'd probably come back with some nonsense such as they used the Tyvek tape because they were all out of foil tape as if that was any better.
  • Steamhead
    Steamhead Member Posts: 16,796
    Proving once again

    you can't fix stupid!
    All Steamed Up, Inc.
    Towson, MD, USA
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting
This discussion has been closed.