Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Faucet ID

Does anyone know who makes this faucet?
8.33 lbs./gal. x 60 min./hr. x 20°ΔT = 10,000 BTU's/hour

Two btu per sq ft for degree difference for a slab

Comments

  • nicholas bonham-carter
    nicholas bonham-carter Member Posts: 8,576
    The best Wall mount kitchen faucet made

    Chicago faucet. Parts may come from a related supplier in Chicago, but I can't find the number now which I got from the factory office. We have 6 in the building, as well as an ancient shower setup (1920's)

    I also got parts from Fergusson over the years-cartridges, and new spouts.--NBC
  • Thanks, Nicholas!!

    But if that's a Chicago, I'll eat my hat.



    The owner sent me the picture and I'll be going out this afternoon to work on it - it's dripping.



    I love Chicago faucets as well and carry a supply of the Zurn ceramic disc cartridges on my truck; both kinds - short and long.  I'll let you know what I come up with.
    8.33 lbs./gal. x 60 min./hr. x 20°ΔT = 10,000 BTU's/hour

    Two btu per sq ft for degree difference for a slab
  • RobG
    RobG Member Posts: 1,850
    Faucet ID

    Why not just replace it with a Chicago faucet? I know restaurant owners are cheap, but with the time you take identifying it you may as well replace it

    Rob
  • nicholas bonham-carter
    nicholas bonham-carter Member Posts: 8,576
    Chicago or somewhere else?

    Chicago faucets were the only ones I could find with the adjustable offset to accommodate the width of our supplies in the 80's. Our handles are different, but the rest looks to be the same.

    Good advice RobG (or is it nick Nolte?).--NBC
  • That's where I may be headed, Nick

    .............er, Rob.     = )



    But it's worth a look-see first.
    8.33 lbs./gal. x 60 min./hr. x 20°ΔT = 10,000 BTU's/hour

    Two btu per sq ft for degree difference for a slab
  • RobG
    RobG Member Posts: 1,850
    How did

    How did you all figure it out? Nick Nolte by day and Rob G, PHCC by night? I must retreat now to my man cave above Gotham City. Alfred has a cold beer waiting.
  • nicholas bonham-carter
    nicholas bonham-carter Member Posts: 8,576
    Celebrity Mugshots

    Whenever I look at the weather, there are plenty of other ads on the page, and I think I stumbled onto celebrity mugshots. Lo and behold, there was fellow Nebraskan-NN!--NBC
  • Identity found.

    The faucet is made by none other than Pioneer Industries out of Taiwan. 
    8.33 lbs./gal. x 60 min./hr. x 20°ΔT = 10,000 BTU's/hour

    Two btu per sq ft for degree difference for a slab
  • nicholas bonham-carter
    nicholas bonham-carter Member Posts: 8,576
    a few miles off

    good detective work!--nbc
  • Steamhead
    Steamhead Member Posts: 16,796
    What

    are you going to replace it with?
    All Steamed Up, Inc.
    Towson, MD, USA
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting
  • First choice is

    Chicago is my first choice, followed by Fisher and  T&S Brass. 



    You got something else in mind?
    8.33 lbs./gal. x 60 min./hr. x 20°ΔT = 10,000 BTU's/hour

    Two btu per sq ft for degree difference for a slab
This discussion has been closed.