Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

smoke detectors

Paul S_3
Paul S_3 Member Posts: 1,261
does anyone have any tips or wiring diagrams for common smoke detectors.....my boss is sending me to a job where it failed inspection because of a in correctly wired smoke detector....i know they usually break the "R" before it hits the thermostat....but are they new ones that i would have to power from the air handler??.....any insight would be helpful...

thanks PAUL S
ASM Mechanical Company
Located in Staten Island NY
Servicing all 5 boroughs of NYC.
347-692-4777
ASMMECHANICALCORP@GMAIL.COM
ASMHVACNYC.COM
https://heatinghelp.com/find-a-contractor/detail/asm-mechanical-company

Comments

  • Zman
    Zman Member Posts: 7,561
    A little more?

    Are you talking about commercial duct sensors? Household smokes? Flame rollout?

    I little more would help.

    Carl
    "If you can't explain it simply, you don't understand it well enough"
    Albert Einstein
  • Paul S_3
    Paul S_3 Member Posts: 1,261
    ZMAN

    Commercial duct sensor....they installed a air handler the other day ....and they are sending me to wire it up....

    PAUL S
    ASM Mechanical Company
    Located in Staten Island NY
    Servicing all 5 boroughs of NYC.
    347-692-4777
    ASMMECHANICALCORP@GMAIL.COM
    ASMHVACNYC.COM
    https://heatinghelp.com/find-a-contractor/detail/asm-mechanical-company
This discussion has been closed.