Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Valve on PRV
heatingman
Member Posts: 5
Comments
-
picture too small
To see any detail?0 -
HOLY
HOLY JUMPIN' GALVANIZED COD FISH!!!!!
That there is a bomb waiting to go off.0 -
u guyyyss
that is for servicing, so u don't have to drain the boiler down to change it. GREAT FEATURE0 -
Whats wrong with that...
LOL, he just spent an extra $6 to make the job dangerous...0 -
Perspective
As long as the customers survive, you'll always have work.0 -
Variable PRV
Was that set to go off at 12 psi? Or to break the gravitational pull of the earth to get out of the basement on take off. Nice!0 -
Am I the only one
who sees the same size image when I click on the thumbnail?0 -
Image
No SWEI. I have an I pad, and was able to blow it up enough to make out what it was. Picture quality is not as good when I do that.0 -
I can zoom in
but the JPEG artifacts are off the charts.
I'm guessing there might be a ball valve instead of (or after) the PRV?0 -
You are
You are kidding?0
This discussion has been closed.
Categories
- All Categories
- 85.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 55 Biomass
- 424 Carbon Monoxide Awareness
- 72 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 129 Geothermal
- 160 Indoor-Air Quality
- 3.3K Oil Heating
- 60 Pipe Deterioration
- 878 Plumbing
- 5.9K Radiant Heating
- 375 Solar
- 14.6K Strictly Steam
- 3.2K Thermostats and Controls
- 58 Water Quality
- 49 Industry Classes
- 89 Job Opportunities
- 28 Recall Announcements