Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

zone issue

i need to replace a zone valve with a circulation pump. Does anyone know how I would go about wiring the pump to the t/stat?

thanks

Comments

  • unclejohn
    unclejohn Member Posts: 1,833
    Yes

    Get a RIB [relay in a box } Break your 110 to the circ. through the normally open contacts and wire the t'stat to the the 24v coil. Done.
This discussion has been closed.