Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
valves
Options
Dave Faust_2
Member Posts: 6
Why refer to the closing diriction of a valve? Why not just hot or cold to refer to valve stems? (This is what happens when you are raised on scorched air!)
0
Comments
-
0 -
faucet primer
Most domestic hot water valves / stems open counter clockwise and close clockwise. Domestic cold water valves / stems open counter clockwise when there is a round or cross handle; a lever ( or wing) handle should open clockwise..........0
This discussion has been closed.
Categories
- All Categories
- 85.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 55 Biomass
- 424 Carbon Monoxide Awareness
- 73 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 129 Geothermal
- 160 Indoor-Air Quality
- 3.3K Oil Heating
- 61 Pipe Deterioration
- 884 Plumbing
- 5.9K Radiant Heating
- 376 Solar
- 14.7K Strictly Steam
- 3.2K Thermostats and Controls
- 59 Water Quality
- 49 Industry Classes
- 89 Job Opportunities
- 28 Recall Announcements