To get email notification when someone adds to a thread you're following, click on the star in the thread's header and it will turn yellow; click again to turn it off. To edit your profile, click on the gear.
The Wall has a powerful search engine that will go all the way back to 2002. Use "quotation marks" around multiple-word searches. RIGHT-CLICK on the results and choose Open Link In New Window so you'll be able to get back to your results. Happy searching!
In fairness to all, we don't discuss pricing on the Wall. Thanks for your cooperation.

Slant/Fin Boiler

once again a quick response and great techncial assitance from Jim Sokolovic the guy in the Lab who is always a big help.

Thanks for the response Steve.

Will call tomorrow and get the change out for this obsolete and defective Integrated control.
· ·

Comments

  • Prodigy 21 Model KC-100

    with a RAM Model H1MC5-01 Integrated Control Board. Does anyone have specific information on this board and its operation.

    Followed the exact procedure for setting up system as outlined in Slant/Fin instructions everything checks out. Getting intermittent operation on the board. I want a procedure for checking the electronics on the board. I have these for Honeywell and United Technology boards but not this board. I am getting two different microamp readings depending on direct from flame sensor or from flame current jack. I am reading 15 microamps at jack, 5 microamps at sensor???

    No one locally has this board.
    · ·
  • Steve LevineSteve Levine Posts: 106Member
    Slant/Fin Prodigy boiler

    Timmie,
    Our head technician on that product will contact you by email this morning. He understands the operation of the control better than any one else.
    Steve
    · ·
This discussion has been closed.

Welcome

It looks like you're new here. If you want to get involved, click one of these buttons!