Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Ivar and Viessmann.

gennady
gennady Member Posts: 839
edited October 2015 in THE MAIN WALL
Our first Ivar Multimix installation.
Robert O'Brienjonny88

Comments

  • Marz
    Marz Member Posts: 90
    Beautiful!!
  • SWEI
    SWEI Member Posts: 7,356
    Had to go look that one up. Nice. Who handles them in the US?
  • njtommy
    njtommy Member Posts: 1,105
    Nice looks great.
  • EzzyT
    EzzyT Member Posts: 1,294
    nice clean work
    E-Travis Mechanical LLC
    Etravismechanical@gmail.com
    201-887-8856
  • Paul Pollets
    Paul Pollets Member Posts: 3,656
    edited October 2015
    Nice work. Do you use the neutralizer when discharging the condensate into a cast iron stack?
  • RobG
    RobG Member Posts: 1,850
    edited October 2015
    Nice! Do they supply all the chrome nipples and flanges? It looks like it's a time saver. Do you think the cost outweighs the labor and space savings?
  • hot_rod
    hot_rod Member Posts: 22,018
    Real nice on the whole installation.

    Are the circs included? I wonder why no ECMs? Seems everything from overseas has changed to ECM.

    Does the T&P probe reach into the tank :)
    Bob "hot rod" Rohr
    trainer for Caleffi NA
    Living the hydronic dream
    RobG
  • RobG
    RobG Member Posts: 1,850
    Is it my imagination or is the T&P discharge insulated? Must have been a helper who did the insulating. :)
  • gennady
    gennady Member Posts: 839
    SWEI said:

    Had to go look that one up. Nice. Who handles them in the US?

    http://www.ivar-group.com/en/web/us/sales-representatives
  • gennady
    gennady Member Posts: 839

    Nice work. Do you use the neutralizer when discharging the condensate into a cast iron stack?

    We do our own neutralizers. It is filled with limestone ships. Right above condensate pump.
  • gennady
    gennady Member Posts: 839
    RobG said:

    Is it my imagination or is the T&P discharge insulated? Must have been a helper who did the insulating. :)

    Yes. We stopped him halfway.
    hot rod said:

    Real nice on the whole installation.

    Are the circs included? I wonder why no ECMs? Seems everything from overseas has changed to ECM.

    Does the T&P probe reach into the tank :)

    We usually install ECM pumps. In this case Ivar has build in differential bypass valve. So installation of delta P circulator did not make sense. Delta T circulators, we still have to figure out some issues we encounter. But this is another topic.

    Viessmann T&P probe is very long and is in the tank.

  • gennady
    gennady Member Posts: 839
    hot rod said:

    Real nice on the whole installation.

    Are the circs included? I wonder why no ECMs? Seems everything from overseas has changed to ECM.

    Does the T&P probe reach into the tank :)

    No, circulators are not included.
  • ivar
    ivar Member Posts: 4
    You can call me directly for more information and where the system can be purchased 443-935-0030. Visit our website to view more or our innovative products.

    Www.ivar-us.com

    John Sandbek
    Regional Sales Manager
  • ivar
    ivar Member Posts: 4
    Thank you Gennady for sharing these pictures. The installation looks absolutely fantastic! Well done!

    We are honored and thankful that you choose to use our system and we look forward to see several more similar installations.

    For those who asked about us, you can find more information about our US sales network here: ivar-group.com/en/web/us/sales-representatives#sales_rapres_item_4.

    Thank you

    Marco Busi,
    President and CEO,
    IVAR US Inc.
  • Rich_49
    Rich_49 Member Posts: 2,766
    Marco ,

    Who does Ocean County NJ ?
    You didn't get what you didn't pay for and it will never be what you thought it would .
    Langans Plumbing & Heating LLC
    732-751-1560
    Serving most of New Jersey, Eastern Pa .
    Consultation, Design & Installation anywhere
    Rich McGrath 732-581-3833
  • Robert O'Connor_12
    Robert O'Connor_12 Member Posts: 728
    Nice looking job!
  • RobG
    RobG Member Posts: 1,850
    If there is no representation in my area can I buy directly from you?
  • ivar
    ivar Member Posts: 4
    Rich said:

    Marco ,

    Who does Ocean County NJ ?

    Hello Rich,

    our agent Ken Brown from TechAir Solutions. His contact details are:

    Ken Brown, brown.ken@comcast.net, Phone: 610.220.7595, www.techairsolutions.com

    You can always contact John Sandbek, our Regional Sales Manager, by email: john.sandbek@ivar-us.com or phone: 443-935-0030.

    thank you for your interest.

    Marco
  • ivar
    ivar Member Posts: 4
    RobG said:

    If there is no representation in my area can I buy directly from you?

    Rob, thanks for your interest.

    what area are you operating from?

    So that we can discuss your options, could you please contact John Sandbek, our Regional Sales Manager for the North East ( john.sandbek@ivar-us.com / 443-935-0030) or myself for anywhere else (marco.busi@ivar-us.com).

    One of us will be able to point you in the right direction.

    Thank you

    Marco