To get email notification when someone adds to a thread you're following, click on the star in the thread's header and it will turn yellow; click again to turn it off. To edit your profile, click on the gear.
The Wall has a powerful search engine that will go all the way back to 2002. Use "quotation marks" around multiple-word searches. RIGHT-CLICK on the results and choose Open Link In New Window so you'll be able to get back to your results. Happy searching!
In fairness to all, we don't discuss pricing on the Wall. Thanks for your cooperation.
Here is the new system, Oil to Gas in MA (Thank you)
First off, Dan, Thank you, for everything I learned and read both in your books and on this site and using your Find A Contractor link
To everyone else thank you for your knowledge, many of my questions were answered in previous posts my other members, thank you for your help.
The old oil system was a noisy over sized, short cycling, spitting, expensive beast. This journey started last winter when after moving in to my new home I realized I had a problem.... I found this site and the adventure began. Two books later (We got Steam Heat and The Lost Art of Steam Heating) and too many hours reading on this site (just ask the Mrs) I was confident I knew enough to find a good contractor. I used the Find a contractor link and found Titan Plumbing and Heating in MA (not sure if I can name drop but I'm so happy they deserve a plug)
Pictures speak a thousand words, oversized, no Hartford loop, copper in the middle of steam runs, no pipes hung, reductions in the middle of runs, just a mess
Converted to Gas with a Power vent, I was worried about the noise factor and it is nothing like the old oil burner, I was worried for no reason. Added a hot water loop and superstore. I know I still need to insulate pipes, and I will.
Thanks again to everyone and (shameless plug) Titan Heating. I credit all of you in educating me to get the system I need and the know how to avoid knuckleheads.
0 · ·