Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Connecting end sections on cast iron baseboard rads
deaner
Member Posts: 6
I have several used center sections of Weil-McLain snug fit cast iron baseboard rads. Sections have push nipples. Do the end sections connect with push nipples also? Or some other type of nipple?
G
G
0
Comments
-
End Sections:
End sections are threaded on one side and use a push nipples on the other side.0 -
CIBB
Thanks , now I get it!
G0
This discussion has been closed.
Categories
- All Categories
- 85.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 55 Biomass
- 424 Carbon Monoxide Awareness
- 72 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 129 Geothermal
- 160 Indoor-Air Quality
- 3.3K Oil Heating
- 60 Pipe Deterioration
- 878 Plumbing
- 5.9K Radiant Heating
- 375 Solar
- 14.6K Strictly Steam
- 3.2K Thermostats and Controls
- 58 Water Quality
- 49 Industry Classes
- 89 Job Opportunities
- 28 Recall Announcements