To get email notification when someone adds to a thread you're following, click on the star in the thread's header and it will turn yellow; click again to turn it off. To edit your profile, click on the gear.
The Wall has a powerful search engine that will go all the way back to 2002. Use "quotation marks" around multiple-word searches. RIGHT-CLICK on the results and choose Open Link In New Window so you'll be able to get back to your results. Happy searching!
In fairness to all, we don't discuss pricing on the Wall. Thanks for your cooperation.

taco zone sentry

t4t4 Posts: 6Member
any  body have any experiance with the new style actuators?
·

Comments

  • Jim GodboutJim Godbout Posts: 49Member
    Taco sentry zone valves

    we install 50-75 per month with great results

    we have been using them since introduction with no product failures

    Taco is great company with tremendous offerings, always ready to support the contractor and the industry.
    Jim Godbout
    ·
  • pipekingpipeking Posts: 252Member
    how

    many can u run off 1 transformer? the taco heat motor u can do a max of 3, and i would think u could do a couple more with these?
    ·
  • ChrisChris Posts: 2,869Member
    A Lot

    You can do 12 on a 40VA Transformer. Also ball valve style, uses stored energy to close, 150PSI shut off pressure, 3/4" has a CV rating of 10. Carries a 3yr warranty..
    "The bitter taste of a poor installation remains much longer than the sweet taste of the lowest price."
    ·
This discussion has been closed.

Welcome

It looks like you're new here. If you want to get involved, click one of these buttons!