To get email notification when someone adds to a thread you're following, click on the star in the thread's header and it will turn yellow; click again to turn it off. To edit your profile, click on the gear.
The Wall has a powerful search engine that will go all the way back to 2002. Use "quotation marks" around multiple-word searches. RIGHT-CLICK on the results and choose Open Link In New Window so you'll be able to get back to your results. Happy searching!
In fairness to all, we don't discuss pricing on the Wall. Thanks for your cooperation.

Just for fun

http://www.youtube.com/watch?v=BhKTMV-ULDM
· ·

Comments

  • Paul RohrsPaul Rohrs Posts: 79Member
    That hurts my knee's just watching that!

    Nice job.   Thanks for sharing.

    What is the warranty on their snowmelt cable? 

    Paul
    · ·
  • Dave Yates (GrandPAH)Dave Yates (GrandPAH) Posts: 267Member
    edited July 2011
    no ouch

    Hard to see because we work & move so quickly(!), but the knee pads did their job & there was no pain in the days that followed. We could reach the first half from the curb side, but used the planks to lay out over the remainder while fastening the cables.



    10-years on the cables & 1-year on the controls. The owners decided they wanted a redundant set installed just in case one of the multiple (yet to be installed) circuits fails.



    Stairway next & then we'll tackle the upper grand entrance area. This started out as a hydronic system during my initial design-phase 1.5-years ago, but the owners wanted to utilize electric.   



    5 years ago, a job like this would have gone from design-to-bid-to-installed in weeks. Seems like the economy has stretched out the process by miles & the hours of work it takes to land bids have expanded exponentially. The race may still be with the swift, but they're racing a longer distance these days!
    Post edited by Dave Yates (GrandPAH) on
    · ·
  • STEVEusaPASTEVEusaPA Posts: 699Member ✭✭
    edited July 2011
    Those guys....

    move fast.  And judging by the hardhats, union guys to boot.  Go back and take a pic right after a blizzard...that should sell a few more :).  Of course, Yakkity Sax (I think), or the Benny Hill song was a perfect touch.
    Post edited by STEVEusaPA on
    steve
    · ·
  • Dave Yates (GrandPAH)Dave Yates (GrandPAH) Posts: 267Member
    Not union, but

    Commercial site & the company safety office is just to the left behind a glass wall & the GC gets written up if any site workers aren't properly outfitted. Cranial lids are no fun in the heat.



    Thanks to Wheels for the notion to add Yakkity Sax.
    · ·
  • SteamheadSteamhead Posts: 9,103Member ✭✭✭
    They're moving too fast

    to tell who is who- but I'm sure you're in there someplace ;-)
    All Steamed Up, Inc.
    "Reducing our country's energy consumption, one system at a time"
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Baltimore, MD (USA) and consulting anywhere.
    · ·
  • Dave Yates (GrandPAH)Dave Yates (GrandPAH) Posts: 267Member
    Wearing

    The green lid, naturally!
    · ·
This discussion has been closed.

Welcome

It looks like you're new here. If you want to get involved, click one of these buttons!